The INGLEWOOD AVIATION, INC. FAA Certificated Repair Station No.ZA4R693M is completely housed in three all steel hangars with attached offices and stockroom with the following:

• 16,292 Square feet of hangar floor space
• 800 Square feet of office space
• 308 Square feet of stockroom floor space
• 308 Square feet of shop space

All floors are constructed of reinforced concrete with tile and carpet overlay in the offices.

All office and shop spaces are lighted with fluorescent light fixtures. All hangar bays are lighted with approximately 50 explosion proof 750 watt lamp assemblies. 220 Volt three phase and 110 Volt-20 amp circuits are available in hangar and shop areas.

One Hangar (No.1) has three doors, each 25' wide. The doors, when open have all overhead clearance of 21' and leave a 76' opening the full length of the hangar. Doors can be operated manually or electrically.

One Hangar (No.2) has one bifold door, 57' wide. The door when open has a overhead. clearance of 20'10" and leaves a opening the full length of the hangar. Door is electrically operated.

One Hangar (No.3) has one bifold door, 80' wide. The door when open has a overhead clearance of 22'6" and leaves a opening the full length of the hangar. Door is electrically operated.

The entire hanger, offices, stockroom and shops are protected with a fire alarm and security. The ramp in front of the hangar is asphault and concrete and is lighted by a light at night.

Training

Training of repair station inspectors and other personnel is accomplished by classroom instruction plus factory and on the job training as necessary.

Factory training is scheduled as necessary for personnel to become familiar with new aircraft and aviation products or product improvements.

Home • Inglewood Aviation • Stanly County Airport • Certified Repair Shop • Engine Installation • Contact Us